Home DE Contact Sitemap Search Worldwide
header
About UsAbout Us ProductsProducts ApplicationsApplications PressPress ContactContact SupportSupport
MOTION CONTROL
Engineered Systems
Cryo, UHV Vacuum
Fiberalingment
Air Bearing
Wafer Inspection
Climate, UV Application
Controllers
Robotics
Linear Stages
Rotation Stages
Piezo Stages
Manual Stages
Accessories
Appendix
ProductspfadMOTION CONTROLpfadEngineered SystemspfadCatalog Page 1.060 ... 1.067
<< backwards Engineered Systems Wafer Inspection forwards >>
Engineered Systems - page 1.060
 

navELECTRONIC INSPECTION

Turnkey system using MT-65 linear stages and a SMC controller including a vision system to measure printed circuit boards.
navzoom...

  
     
Engineered Systems - page 1.064
  navMULTIAXES STANDARD
navCOMBINATION

DT-80 stack with a common center of rotation for realising a motorized gimbal mount. Iris diaphragm with DT-80
navzoom...		  
     
Engineered Systems - page 1.065
  navSENSOR CALIBRATION

LEFT:
Two axes rotary system mounted on a DT-120 rotary stage with harmonic drive. RIGHT:
XYZ-positioning system with 4 degrees of freedom using a PLS- 5 and DT-50.
navzoom...		  
     
Engineered Systems - page 1.066
  navMULTIAXEX STANDARD
navCOMBINATION

LEFT: Elevation stage HT-90, two goniometers WT-100 and WT- 5 plus a ARS-65 rotary stage with a common center of rotation.
RIGHT: Manual VT- 0 stage with linear scale.
navzoom...		  
     
Engineered Systems - page 1.067
  navBALL SCANNING

LUCIA BalScan is a ballistic identification system, which can be used for routine bullet and cartridge case scanning and
comparison work. It can also be used for building up central databases and for networking ballistic laboratories. Movement and scanning in 6 axes: ...
navvisit... Lucia Forensic out
navzoom & read more...		  
     
Engineered Systems - page 1.068
 
navINSPECTION SENSOR MEASURMENT

3 Axes Inspection System. This 3 axes positioning system was custom developed for inspection of small optical parts and is well suited for tasks of reflected and transmitted light microscopy.
XY adjustment is made using a MS-8 scan stage with 8” travel range. A MT- 5 linear stage mounted on a granite bracket allows adjustment of focus of CCD...
navzoom & read more...
  
forwards >>  
navAll Product Innovations in 2011 can be found here.
navDownload the complete MAC PhotonX 2007 catalog 10MB
navDownload the complete MOTION CONTROL VOL10 catalog 15MB
navImprint © 2012 PI miCos GmbH - All rights reserved.
top top print this page print E-Mail Email
navPhone +49 7634 5057-0    Fax -99 Thank you for your visit.